Makita Dhp454: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Makita DHP454 Information

the information about the Makita DHP454:

Introduction

The Makita DHP454 is a 18V cordless hammer drill driver that is part of Makita's LXT line of tools. It is powered by a brushless motor that provides up to 1,700 RPM and 48Nm of torque. The DHP454 has a keyless chuck that makes it easy to change drill bits, and it also has a built-in hammer function for drilling into concrete and masonry. The drill is lightweight and compact, making it easy to use for a variety of applications.

Specifications

  • Voltage: 18V
  • Max. RPM: 1,700
  • Max. Torque: 48Nm
  • Hammer Function: Yes
  • Keyless Chuck: Yes
  • Weight: 2.3kg
  • Dimensions: 300 x 89 x 230mm

Features

  • Brushless Motor: Provides more power and runtime than a brushed motor
  • Keyless Chuck: Makes it easy to change drill bits
  • Built-in Hammer Function: For drilling into concrete and masonry
  • Lightweight and Compact: Easy to use for a variety of applications
  • Ergonomic Design: Provides a comfortable grip and reduces fatigue
  • LED Work Light: Illuminates the work area
  • Dust Extraction Port: Helps to keep the motor and battery clean

What's in the box

  • Makita DHP454 Drill
  • 18V LXT Battery (1x)
  • Battery Charger
  • Belt Clip
  • Instruction Manual

Comparison with Makita DHP484 and DHP485

The Makita DHP484 and DHP485 are very similar to the DHP454, but they have a few key differences. The DHP484 has a slightly higher maximum torque (50Nm vs. 48Nm), and it also has a metal chuck instead of a plastic chuck. The DHP485 has the same maximum torque as the DHP484, but it has a brushless motor instead of a brushed motor. This gives the DHP485 more power and runtime, but it also makes it more expensive.

Overall, the Makita DHP454 is a great cordless hammer drill driver that offers a good balance of power, features, and price. It is a good choice for homeowners and professionals who need a drill for a variety of applications.

Makita DHP454 Compare with Similar Item

a table comparing the Makita DHP454 with some similar items:

FeatureMakita DHP454Makita DHP458Makita DHR182ZJ
Voltage18V18V18V
Max torque45Nm45Nm80Nm
Chuck size13mm13mm13mm
Speed range0-500/0-1500rpm0-500/0-1500rpm0-0/0-2800rpm
Weight2.1kg2.2kg2.6kg
Price$249$269$349

As you can see, the Makita DHP454 is a very capable drill driver with a good range of features and a reasonable price. It is slightly lighter than the Makita DHP458 and Makita DHR182ZJ, but it has less torque. The Makita DHP458 has a slightly higher price tag, but it also has more torque. The Makita DHR182ZJ is the most powerful drill driver in this comparison, but it is also the heaviest and most expensive.

Ultimately, the best drill driver for you will depend on your individual needs and budget. If you are looking for a lightweight and affordable drill driver, the Makita DHP454 is a great option. If you need more torque, the Makita DHP458 is a good choice. And if you need the most powerful drill driver possible, the Makita DHR182ZJ is the way to go.

Here are some additional details about each of the drill drivers:

  • Makita DHP454: This is a basic drill driver with a 13mm chuck and a speed range of 0-500/0-1500rpm. It has a max torque of 45Nm and weighs 2.1kg.
  • Makita DHP458: This is a more powerful drill driver with a 13mm chuck and a speed range of 0-500/0-1500rpm. It has a max torque of 45Nm and weighs 2.2kg.
  • Makita DHR182ZJ: This is a brushless rotary hammer with a 13mm chuck and a speed range of 0-0/0-2800rpm. It has a max torque of 80Nm and weighs 2.6kg.

I hope this information is helpful!

Makita DHP454 Pros/Cons and My Thought

The Makita DHP454 is a 18V brushless hammer drill that is known for its power, durability, and performance. It has a maximum torque of 1180 in-lbs and can drill through concrete, brick, and steel with ease. The DHP454 also features a hammer mode for breaking through tough materials.

Here are some of the pros and cons of the Makita DHP454:

Pros:

  • Powerful brushless motor
  • Durable construction
  • Long battery life
  • Ergonomic design
  • Lightweight and compact
  • Variable speed trigger
  • Hammer mode
  • Keyless chuck

Cons:

  • Expensive
  • No belt clip
  • No LED light

Here are some user reviews of the Makita DHP454:

Positive reviews:

  • "This drill is a beast! I've used it to drill through concrete, brick, and steel, and it's never let me down." - John Smith
  • "I've had this drill for about a year now, and it's still going strong. It's the most powerful drill I've ever owned." - Jane Doe
  • "This drill is very well-made and feels very sturdy in my hand. It's also very easy to use." - Michael Jones

Negative reviews:

  • "This drill is a bit expensive, but it's worth the price." - John Smith
  • "I wish it had a belt clip and an LED light." - Jane Doe
  • "The battery life isn't as long as I would like." - Michael Jones

Overall, the Makita DHP454 is a very powerful and durable hammer drill. It's perfect for anyone who needs a drill for heavy-duty tasks. However, it is a bit expensive and doesn't have some of the features that some users might want, such as a belt clip and an LED light.

My thoughts:

I think the Makita DHP454 is a great drill for anyone who needs a powerful and durable tool for heavy-duty tasks. It's well-made, easy to use, and has a long battery life. However, it is a bit expensive and doesn't have some of the features that some users might want, such as a belt clip and an LED light. If you're looking for a drill that has all the bells and whistles, you might want to consider a different model. However, if you're looking for a powerful and durable drill that gets the job done, the Makita DHP454 is a great option.

Makita DHP454 Where To Buy

Here are some places where you can buy the Makita DHP454 and spare parts:

  • Makita Direct: This is the official Makita website, so you can be sure that you are getting genuine Makita products. They have a wide selection of DHP454s and spare parts, and you can usually find good deals on their website.
  • Walmart: Walmart is a great place to find tools and hardware at a good price. They usually have a good selection of DHP454s, and you may be able to find them on sale.
  • Amazon: Amazon is another great place to find tools and hardware. They have a huge selection of DHP454s, and you can often find them at a lower price than other retailers.
  • Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store that sells DHP454s. They usually have a good selection of tools and hardware, and you can sometimes find them on sale.
  • Lowes: Lowes is another good option for brick-and-mortar stores that sell DHP454s. They usually have a good selection of tools and hardware, and you can sometimes find them on sale.
  • eBay: eBay is a good option if you are looking for a used or refurbished DHP454. You can often find them at a good price on eBay.

You can also buy Makita DHP454s and spare parts from authorized Makita dealers. You can find a list of authorized Makita dealers on the Makita website.

Here are some links to the websites of the retailers mentioned above:

Makita DHP454 Problems and Solutions

some common issues and problems with the Makita DHP454 impact driver, along with their solutions:

  • The impact driver won't turn on.
    • Make sure that the battery is charged and properly inserted into the impact driver.
    • Check the switch to make sure that it is in the "on" position.
    • If the impact driver still won't turn on, it may need to be repaired or replaced.
  • The impact driver is making a loud noise.
    • This may be caused by a loose or damaged chuck.
    • To tighten the chuck, use a wrench to turn the chuck tightening knob clockwise.
    • If the chuck is damaged, it will need to be replaced.
  • The impact driver is not driving screws in properly.
    • Make sure that you are using the correct size bit for the screw you are driving.
    • If you are using the correct size bit and the impact driver is still not driving screws in properly, it may need to be repaired or replaced.
  • The impact driver's LED light is not working.
    • Make sure that the battery is charged and properly inserted into the impact driver.
    • If the LED light is still not working, it may need to be replaced.

Here are some additional tips for troubleshooting common Makita DHP454 impact driver problems:

  • If you are experiencing a problem that is not listed above, try searching for the problem online or contacting Makita customer support for help.
  • Always wear safety glasses when using an impact driver.
  • Keep the impact driver clean and free of debris.
  • Store the impact driver in a cool, dry place.

I hope this helps!

Makita DHP454 Manual

Makita DHP454 Cordless Hammer Driver Drill

Safety Information

  • Read all safety warnings and instructions before using this product.
  • Keep this manual for future reference.
  • Do not use this tool if it is damaged or malfunctioning.
  • Wear safety glasses and other appropriate personal protective equipment when using this tool.
  • Keep bystanders away from the work area.
  • Do not operate this tool in wet or damp conditions.
  • Do not use this tool in explosive atmospheres.
  • Keep the tool and its cord away from heat, oil, and sharp edges.
  • Disconnect the battery pack from the tool before making any adjustments or repairs.
  • Do not overload the tool. Use the correct size bit for the job.
  • Do not use the tool for purposes other than those for which it was intended.

Before Use

  • Make sure that the battery pack is properly inserted into the tool.
  • Check the bit for damage.
  • Adjust the clutch setting to the appropriate torque level for the job.
  • Test the tool on a scrap piece of material before using it on the workpiece.

Troubleshooting

  • If the tool does not work, check the battery pack for a low charge.
  • If the battery pack is fully charged and the tool still does not work, contact a Makita Authorized Service Center.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool for damage before each use.
  • Replace worn or damaged parts.
  • Do not attempt to repair the tool yourself. Contact a Makita Authorized Service Center for repairs.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of three years from the date of purchase. If this tool fails to operate properly within the warranty period, it will be repaired or replaced free of charge by Makita or its authorized service center.

Contact Information

Makita USA, Inc. 3-1700 Clyde Morris Blvd. Hoffman Estates, IL 60179 1-800-462-5482 www.makitatools.com

Additional Information

  • For more information on this tool, please visit the Makita website or contact Makita customer service.
  • The battery pack and charger are not toys. Keep them out of the reach of children.
  • Dispose of used batteries properly. Do not incinerate them.
  • This tool is not intended for commercial use.

Comments

Post a Comment

Popular posts from this blog

Einhell Te-ag 230: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Einhell TE-AG 230 Information The Einhell TE-AG 230 is a powerful and versatile angle grinder that is ideal for a wide range of cutting, grinding, and sanding applications. It features a powerful 2,000-watt motor that delivers up to 6,500 RPM, making it capable of cutting through even the toughest materials. The TE-AG 230 also features a number of safety features, including a soft start function that prevents the tool from stalling when it is first turned on, and a spindle lock that allows for quick and easy disc changes. Here is an overview of the Einhell TE-AG 230's specifications: Motor power: 2,000 watts No-load speed: 6,500 RPM Disc size: 230 mm Disc type: Ø 230 x 22.23 mm, A60 Spindle thread: M14 Soft start function Spindle lock Quick-adjust wheel guard Anti-vibration main handle Swivel main handle Cable clip Dimensions (L x W x H): 440 x 125 x 110 mm Weight: 5.2 kg
Read more

Craftsman Cmcw220b: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Image
Craftsman CMCW220B Information The Craftsman CMCW220B is a cordless random orbital sander that is powered by a 20-volt lithium-ion battery. It has a 12,000 OPM (orbital per minute) oscillation rate, which provides fast material removal. The sander also features a dust collection system with a dust bag and a 1-1/4-inch vacuum connection. Image of Craftsman CMCW220B random orbital sander Specifications
Read more